These tools are specifically “engineered for excellence”, and designed with durability and longevity in mind. The GTS10J weighs 26 kg, which is not exactly lightweight, but this does include a neat storage facility under the table surface into which you can clip all the fences, tools and accessories that come with the tool.
携带手柄也在坚固的框架上，电动机和刀片受到两层绝缘材料的保护。桌面可以延伸以允许高达8'x 4'的薄片以刀片的左侧和右侧的460 mm夹在刀片左侧。
The motor is very powerful – its 1,800 Watts can create a no-load speed of 3,650 rpm. It also has a soft start, from a large well-positioned on-off switch, and runs with overload protection. Its 10″ blade (with 30 teeth) can cut to a depth of 79 mm when set at 90 degrees and 55 mm when set at 45 degrees.
The帕克品牌PTS250is a really good budget table saw for DIY enthusiasts.
In many instances it is hard to differentiate many of its features from equivalent ones belonging to its more expensive competitors. For example the (non-folding) stand is as strong and sturdy, the table size is of similar size and extends to the sides (642 mm x 938 mm when extended), and its aluminium fence is equivalent in strength, length (approx ¾ the length of the table) and its single point locking mechanism.
斜切规格易于固定位置，可以容纳+/- 60度之间的交叉切割。控制刀片上升，跌倒和倾斜的手轮也很顺利地工作。电机额定在2,000瓦特，实际上比其所有竞争对手更强大，并且可以产生5,000 rpm的空载速度，而大多数就是足够的工作。在安全性方面，刀片护罩和劈刀刀具良好地构造并连接到灰尘提取端口。
The on-off switch is well-positioned, protected and easy to operate. For a cheap table saw there is a lot to admire about this table saw in particular.
Evolution Rage 5s表看到了评论
TheEvolution Rage 5s表锯stands out from its table saw competition thanks to its revolutionary 255 mm multi-material cutting blade. You don’t have to worry about extracting nails embedded in wood. This blade doesn’t care! It will rip through all kinds of material from reclaimed wood and studwork to box section, RSJ’s and roof flashings!
This table saw is not just powerful but versatile too. It features the largest table size on our list with maximum dimensions of 1200 x 640 mm so larger workpieces can be handled with ease. It comes with transport wheels so it can easily be manouvred into the correct working position and a folding stand so it can be collapsed and conveniently stored after use.
The cutting height and angle can be easily adjusted with the hand wheel and calibrated gauge and you can cut down to 83 mm with the blade in a vertical position and 58 mm if tilted to 45 degrees. Complex projects are no problem for this saw either. It can accommodate common compound cuts with its 60 degree mitre cut and 45 degree bevel cut capacity. The aluminium fence clamps into place at one end parallel to the blade to ensure accurate rip cuts and the mitre gauge fits snugly into its slot on the table for accurate cross-cut work.
Evolution Fury 5s表看到了审查
TheEvolution Fury 5-S进化是5-s的“表兄弟”。均均股东展开的专利技术和大多数设计特征。Fury的主桌尺寸较小（938毫米×642毫米，相比1,200 mm x 640 mm），愤怒的折叠支架和运输轮由毛茸茸的非易达架和橡胶脚取代。
The Fury is a budget option that inherits the underlying technology of the upmarket Rage. In terms of build quality the Fury even has an anti bounce device to ensure the table remains stable during cutting. Like the Rage the hand wheel and calibrated guage allow for easy adjustment of the cutting height and angle. Depth of cut is 85 mm with the blade in a vertical position and 65 mm if tilted to 45 degrees. Compound cuts are also no problem for the Evolution Fury as the mitre gauge angle extends to 60 degrees either side of the vertical for and the bevel angle tilts to 45 degrees.
The aluminium fence clamps into place at one end parallel to the blade to ensure accurate rip cuts and the mitre gauge fits snugly into its slot on the table for accurate cross-cut work.
Like the Evolution Rage table saw the Fury features the proprietory multipurpose blade that effortlessly cuts through wood, plastics, aluminium, mild steel, ferrous metals, non-ferrous metals and much more. For keen DIYer’s this is an attractively priced table saw is seriously worth considering.
Bosch AdvancedTableCut 52 Portable Table Saw Review
TheBosch AdvancedTablecut 52桌锯is another quality portable table saw from Bosch.
这是一个更实惠的，更轻，更紧凑的范围内的版本博世GTS10J表锯featured above. The AdvancedTableCut 52 weighs just 8.5 kg, less than half the amount of the GTS10J.
This revolutionary mechanism minimizes the vibration typically associated with a traditional table saw. It also gives you the option of actually “pulling” the blade through the fixed workpiece for shorter cuts, rather than pushing the workpiece through with a push stick. The pull function is also a great safety feature as it keeps your hands clear of the sawing area.
The saw can make vertical cuts to a depth of 52 mm (hence its name). It can also make horizontal mitre cuts of +/- 60 degrees and vertical mitre cuts of 45 degrees.
This innovative design makes theBosch AdvancedTablecut 52桌锯a very attractive option for many DIYers and it comes at a very respectable price.
Einhell TC-TS 2025 / 2U 1800 W表看到了评论
顶部由橡胶脚的坚固框架支撑。563 mm x 583 mm桌面可以通过另一个165 mm延伸到左侧和右侧，以适应更大的工作件。
Solid parallel and cross stops help to secure the workpiece in place and if you are performing cross-cuts the cross stop contains an angle scale of +/- 60 degrees to ensure accuracy. A dual-purpose handle controls both the height and angle of the blade. The blade guard is also transparent to provide greater visibility when cutting. The saw can cut to a depth of 85 mm when positioned at 90 degrees and 65 mm when angled at 45 degrees.
To minimise the prospect of escaping dust, the blade is enclosed in a metal housing that also includes a chip extractor port at the rear of the saw.
The large On-Off button is easy to operate and the powerful 1,800 Watt motor can generate a no-load speed of 5,000 rpm. The motor features a soft start with built-in overload protection.
Which Table Saw Should I Buy?
The table saw (aka bench saw, saw bench, saw table or even table saw bench) is an extremely powerful and versatile cutting machine. A circular saw blade, driven by a motor, and mounted on an arbor secured with trunnions, protrudes through a slot in the table top. There are 5 major categories of table saw of which the first 2 – Cabinet and Hybrid – are stationary, and the last 3 – Jobsite/Contractor/Compact and Benchtop – are portable.
The cabinet saw is the best-engineered, largest, heaviest, most powerful and accurate. It consists of a cast-iron table top, most likely with table extensions to each side, sitting on top of a cabinet that encloses a belt-driven motor. The cabinet protects the motor and stops most dust escaping. This would be the table saw of choice for a professional workshop and costs many hundreds of pounds. Next up is the hybrid table saw. This is essentially a ‘cut-down’ version of the cabinet saw with similar features but smaller, lighter, less powerful and less costly.
固定台式电锯或台锯,而不明eter than portable ones though. This is due to the fairly obvious fact that the motor is actually enclosed within the stationary saw’s cabinet, thus improving noise absorption, and secondly the saw blade drive mechanisms are different. The stationary table saw uses an induction motor and the blade arbor is driven by a belt or pulley system. On most portable saws the universal motor drive shaft itself behaves as the arbor so vibrations from working with the stock piece are transmitted back to the unit itself, resulting in greater noise levels. Also with portable units you do have to make separate provision for dust collecting. Dust outlet/collection ports are built in but they do need to be hooked up to a stand alone vacuum tool.
Benchtop版本是便携式桌子锯市场中的入口级别，可从任何扁平的工作面运营。它没有带摊位（虽然你可以单独购买）。除了业余爱好者迷你和微锯，它是桌子锯家族的最小，最轻，最便携，可以用手从一个位置携带到另一个地方。这是它的主要销售点。为了实现这种多功能性，部件由较轻的材料制成（主桌子通常由铝而不是铸铁制成），但这不会减损其耐久性。在尝试使用较大的库存时，表格的平方区域显然会是一个约束，并且与紧凑型/ jobsite /承包商看见表扩展名并不是一个与台式表锯的选项。
Other considerations include the fact that the blade is usually positioned towards the front of the table so there is less room to manoeuvre a mitre gauge for example. Also the fences are usually made to fit the table according to the manufacturer’s specific design so you can’t replace them with more generic aftermarket versions. But taking all this into account these are perfectly acceptable constraints when you consider how relatively inexpensive the benchtop table saw is, how versatile it is and all the functions it can perform, especially for most hobbyists and significant numbers of professionals too. There is more on how it can be used later in this guide.
Main Components / Features
除了桌面外，桌子锯的最重要的特点是锯片本身。为了垂直切割到不同的深度，有一个抬起或降低刀片的手柄。对于成角度（倾角）切割另一个手柄可以将刀片倾斜至左侧或右侧45度。喉板围绕刀片以确保灰尘不会将刀片的边缘落在桌面上的槽中到轴轴或驱动轴（如果是直接驱动电动机）。一把刀片护罩 - 理想情况下，它应该由透明的有机玻璃 - 铰链到桌子上，以保护用户免受刀片。
Of course the other most important feature is the blade itself. Most table saws will come supplied with a generic blade designed to work to that saw’s specification. That may sound obvious but there are so many variations of blade that if you ever wanted / needed to replace it you need to be very sure you choose the correct one, since a mistake could not only spoil your workpiece but also cause you serious injury. For example both saw and blade are designed to work to a max speed (rpm). If the former exceeds the latter the centrifugal force created by the mismatch will destroy the blade.
除了刀片RPM之外，您需要考虑的是它的尺寸 - 它的直径，宽度和孔尺寸 - 以确保它与锯本身兼容。最流行的直径为10英寸，这相当于垂直切割深度约为3½“。无绳锯，最近引入，通常采用8-1 / 4“直径的刀片。孔尺寸通常为⅝“，宽度XXX。
接下来你需要考虑你将切割的材料以及你想要切割的粗糙或罚款。例如，撕裂刀片更适合撕裂较柔软的树林 - 牙齿较少，将更快地喂养，但造成较粗的表面。相反，横冲刀片更适合 - 你猜到了 - 横切！它们有更小的牙齿，留下更精细的表面，但切割需要更长时间。然而，很多时间，你都希望选择削减（和更多）而不是想要改变刀片，所以组合刀片可能是更好的选择。这也可用于切入其他更柔软的材料。对于常规切割成更硬的材料（例如硬木，金属），您将更好地享用这种目的的刀片。对于更多专家内交联任务，例如切槽，您需要一个Dado堆栈（检查乔木长到足以容纳它）。
篱笆是一个金属计,对t是固定的he edge of the saw table and aligned parallel to the saw blade. It acts as a fixed guideline against which you offer up your workpiece when making a rip cut. It is set parallel to the saw blade. Clearly the more accurately the fence is aligned the more true will be the cut and so it is very important to ensure you are able to fine tune the fence’s alignment accordingly and that the sliding / adjustment / locking mechanisms are smooth, precise and well machined. If you get this wrong then the workpiece is likely to bind and cause kickback.
以同样的方式一个栅栏充当一个直尺for rip cuts along the grain so does a mitre gauge for cross or angled cuts against the grain. The mitre gauge is made up of a guide and an adjustable half moon section. The guide sits inside and moves up and down a slot or track in the table surface that is set parallel to the blade. The half moon section pivots on the guide up to an angle of 45 degrees either side of the vertical. You select your cutting angle, lock the half moon section into place, position your wok piece against it and slide the gauge and workpiece together towards the blade. As with the fence look for a well machined smooth gliding mechanism and avoid any play or wobbling between the guide and the slot. More sophisticated versions have an upside down T-slot profile (instead a plain slot) to accommodate the guide and provide a tighter fit.
锯末，碎片和桌锯上的任何其他毛刺的收集和拆卸对于让您的桌子锯有效地运行至关重要，将其保持在峰值工作状态，最重要的是保持安全。为什么保持安全？因为任何碎屑都与快速纺纱刀片接触的任何堆积都会导致摩擦，加热并最终着火。在机柜锯上，问题相对容易解决，因为碎片在机柜本身内收集并落在倾斜的搁板上，以使其进入灰尘提取端口（通常为4“直径）。然后，你只能从真空中涂上抽吸。但是，便携式锯显然不是以这种方式设计，即使它们的大部分碎屑也将被转移到灰尘端口（通常为2½“直径）上，在其上附加真空软管时，还有更多的是由于the more ‘open’ design of a portable saw (and also fall from the base of the saw to the ground). So further vacuuming will be required to keep your work area pristine.
Most people consider the table saw / bench saw / saw table the most dangerous of all power tools because you are guiding the material towards the saw rather than the saw towards the material. Essentially you are faced with a thin metal disc with incredibly sharp teeth spinning at thousands of RPM a few inches away from your body. The blade is definitely your number one enemy! But you also have a number two enemy and that is kickback. Kickback happens when your workpiece binds and buckles during the cutting operation (because it is not correctly aligned) and is then projected at force back in your direction.
So to protect yourself you need to be taking all the safety precautions you can think of!
These days the best table saw models will all come with a magnetic switch. This is a great idea because in the event of a power cut the magnet automatically stops the saw starting up when power is restored from the mains.
And finally if the on-off button is recessed behind a protective flap that mechanism protects the button from being accidentally pressed.
刀片护罩可能是桌子锯应该具有最明显的安全功能。它坐落在刀片上，保护你的手和手指。显然，它应该尽可能频繁地使用，但有时需要拆除它 - 例如，如果您未通过材料完全切割，当您想要更换刀片或留下材料时，当您陷入困境时。我的建议总是把它放回去！还要尝试寻找透明（而不是不透明）有机玻璃保护，因为您对切割有更多的控制和可见性。
The riving knife is a fin-shaped piece of metal that sits very closely behind the blade. It is not only designed to protect the operator from the blade, but also to prevent kickback by keeping the 2 sawn pieces separate as they move past the blade so they cannot bind against it.
Further Safety Precautions
在你甚至想到使用最好的桌子之前，看到了一些时间给自己一个偶然！检查你没有穿什么可以纠结的东西，如松散的衣服或珠宝 -always wear suitable clothing。保护你的眼睛免受灰尘颗粒，更糟糕认证的安全护目镜。保护您的耳朵从高噪声水平桌锯发射（特别是直接驱动台锯）的耳朵good pair of ear defenders。你可以用一个优质的对手保护你的手工人的手套。甚至用硬帽子和嘴巴保护你的头部face mask。
Safety – Using the saw
Set the fence or the mitre gauge, position the workpiece against it, offer the workpiece up to the blade and switch on the saw. Take your push stick (supplied as an accessory with the table saw) and guide the workpiece through the blade with it. Never PUSH your workpiece onto the blade. It will feed through under its own inertia. Be patient – if you try to force it through it will kickback. One other tip – if you are making a cross-cut do not use the mitre gauge and the fence together – that too will also result in kickback as the workpiece will bind against the fence – so just remove the fence.
And that’s it! Follow those precautions and you should come out unscathed!